Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL PPX™ Resin PPX7115PF - (PPE+PP) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL PPX™ Resin PPX7115PF:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl PPX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
NORYL PPX7115PF resin is a non-reinforced alloy of polyphenylene ether (PPE) + polypropylene (PP). This FDA certified injection moldable grade exhibits high impact resistance and good heat resistance along with hydrolytic and dimensional stability. Target application of NORYL PPX7115PF is food contact water management component requiring high impact, chemical resistance and good heat performance.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 14 cm³/10min ISO 1133
온도 260 °C -
하중 5 kg -
ASTM 데이터
용융 흐름성, MFI 16 g/10min ASTM D 1238
온도 260 °C -
하중 5 kg -
성형 수축률, 평행 0.007 mm/mm ASTM D 955
성형 수축률, 수직 0.007 mm/mm ASTM D 955
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 1430 MPa ISO 527
항복강도 30 MPa ISO 527
파단시 신율 125 % ISO 527
굴곡 계수, 23°C 1440 MPa ISO 178
굴곡 강도 46 MPa ISO 178
아이조드 충격은 노치 37 kJ/m² ISO 180/1A
온도 8 °C -
탄성 노치드 충격 강도, +23°C -30 kJ/m² ISO 8256/1
ASTM 데이터
인장탄성률 1240 MPa ASTM D 638
항복강도 35 MPa ASTM D 638
파단시 강도 34 MPa ASTM D 638
항복변형률 8 % ASTM D 638
파단시 신율 125 % ASTM D 638
굴곡 계수 1370 MPa ASTM D 790
굴곡 강도 51 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 534 J/m ASTM D 256
아이조드 충격은 노치, 1/4 in 81 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature -30 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 82 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 110 °C ISO 75-1/-2
비카트 연화 온도, A 131 °C ISO 306
ASTM 데이터
열팽창 계수, 평행 78 E-6/K ASTM D 696
열팽창 계수, 수직 130 E-6/K ASTM D 696
DTUL @ 66 psi 111 °C ASTM D 648
DTUL @ 264 psi 84 °C ASTM D 648
비카트 연화 온도 83 °C ASTM D 1525
기타 특성값단위시험규격
밀도 990 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 60 - 65 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.02 % -
성형온도 30 - 50 °C -
Zone 1 225 - 275 °C -
Zone 2 240 - 280 °C -
Zone 3 250 - 290 °C -
Nozzle temperature 260 - 290 °C -
Screw speed 20 - 100 rpm -
Back pressure 0.3 - 0.7 MPa -
특징
생산 공정
사출 성형
특별 특성
고충격 또는 고충격 보강, 열안정성
내화학성에
Hydrolytically Stable
Certifications
Food contact, Food approval FDA 21 CFR
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.